Home > Product
Hardox 400 Plates & Sheets/AR (Hardox 400) Steel Plates and Sheets are utilized to create of various items, for example, transports, chutes and liners and total holders. Our solid relationship with dependable merchants empowers us to offer these plates as indicated by determinations set around our profitable customers. These Hardox 400 Plates and Sheets are broadly requested by customers inferable from its high quality, sturdy execution and rough development Apart from this, these Hardox 400 Plates and Sheets show a phenomenal mix of high imperviousness to effect, workability, weld capacity and imperviousness to scraped area.
Hardox 400 Plates and Sheets joins through-hardness and sturdiness with unrivaled fire cutting, framing, and welding qualities. With an average BHN hardness of 360 – 440, this easy to use grade allows more scope in outline and manufacture for the end client. Hardox 400 Plates and Sheets are reasonable for applications that require a decent level of scraped area resistance, for example, pail segments, development gear, and wear plates utilized as a part of an assortment of commercial ventures like mining, ranger service and development. This item will last up to four times longer than conventional high-quality auxiliary plate. Each creating plant has its own restrictive concoction sythesis and heat-treating process. IB Export is cheerful to give the factory particular details.
| Item | Abrasion Resistant Plate |
|---|---|
| Material | Hardox 400 |
| Thickness | 3-130mm |
| Width | 500-3000mm |
| Length | 1000-12000mm |
| Heat Treatment | N, Q+T |
| Surface Paint | EP, PE, HDP, SMP, PVDF |
| Plate | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
|---|---|---|---|---|---|---|---|---|---|---|---|
| thickness mm | max % | max % | max % | max % | max % | max % | max % | max % | max % | typv | typv |
| 3-(8) | 0.15 | 0.7 | 1.6 | 0.025 | 0.01 | 0.3 | 0.25 | 0.25 | 0.004 | 0.33 | 0.23 |
| 08/20/13 | 0.15 | 0.7 | 1.6 | 0.025 | 0.01 | 0.5 | 0.25 | 0.25 | 0.004 | 0.37 | 0.27 |
| (20)-32 | 0.18 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.25 | 0.25 | 0.004 | 0.48 | 0.29 |
| (32)-45 | 0.22 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 0.5 | 0.6 | 0.004 | 0.57 | 0.31 |
| (45)-51 | 0.22 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 0.5 | 0.6 | 0.004 | 0.57 | 0.38 |
| (51)-80 | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 1 | 0.6 | 0.004 | 0.65 | 0.41 |
| (80)-130 | 0.32 | 0.7 | 1.6 | 0.025 | 0.01 | 1.4 | 1.5 | 0.6 | 0.004 | 0.73 |
Plate thickness below 4 mm only after special agreement
CEV = C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15
CET = C + （Mn+Mo）/10+( Cr+ Cu)/20+ Ni/40
| Grade | Mechanical Property | Charpy V Impact Test | |||
|---|---|---|---|---|---|
| HADOX 400 | Yield | Tensile | Elongation | Degree | longitudinal |
| Min Mpa | Mpa | Min % | -40 | J | |
| 1000 | 1250 | 10 | 45 | ||
