Home > Product
Hardox 600 has a hardness of 600 Brinell, yet can in any case be cut and welded an astounding plate for elite applications. HARDOX 600 is an abrasion resistant plate with a hardness of 600 HBW, expected for applications where requests are forced on abrasion resistant in mix with great chilly twisting properties. HARDOX 600 offers great weldability. Supplementary Technology: Brinell hardness, HBW as indicated by EN ISO 6506-1, on a processed surface 0,5–2 mm underneath plate surface per warmth and 40 tons. Tests are made for each variety of 15 mm in the thickness of plates from the same warmth.
We can further provide these hardox 600 plates in various sizes, shapes and dimension as per client requirements. We make sure that products provided by us are at reasonable cost.
Specification Of Hardox 600 Plates & Sheets
| Item | Abrasion Resistant Plate |
|---|---|
| Material | Hardox 600 |
| Thickness | 8-50mm |
| Width | 500-3000mm |
| Length | 1000-12000mm |
| Heat Treatment | N, Q+T |
| Surface Paint | EP, PE, HDP, SMP, PVDF |
Chemical Composition Of Hardox 600 Plates & Sheets
| Plate | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
|---|---|---|---|---|---|---|---|---|---|---|---|
| thickness mm | max % | max % | max % | max % | max % | max % | max % | max % | max % | typv | typv |
| 8-30 | 045 | 0.7 | 1.00 | 0.015 | 0.01 | 1.2 | 2.5 | 0.8 | 0.004 | 0.73 | 0.55 |
| (30)-50 | 0.47 | 0.7 | 1.00 | 0.015 | 0.01 | 1.2 | 2.5 | 0.8 | 0.004 | 0.84 | 0.59 |
Plate thickness below 4 mm only after special agreement
CEV = C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15
CET = C + （Mn+Mo）/10+( Cr+ Cu)/20+ Ni/40
Mechanical Properties Of Hardox 600 Plates & Sheets
| Grade | Mechanical Property | Charpy V Impact Test | ||
|---|---|---|---|---|
| HADOX 600 | HBW | Elongation | Degree | longitudinal |
| Min Mpa | Min % | -40 | J | |
| 570-640 | 10 | 20 | ||
